Practical hints
What to do if …
Lamps in instrument cluster
General information:
If any of the following lamps in the instru-
ment cluster fails to come on during the
bulb self-check when switching on the igni-
tion, have the respective bulb checked and
replaced if necessary.
Problem
Possible cause/consequence
Suggested solution
-
The yellow ABS indicator lamp
The ABS has detected a malfunction and has ̈ Continue driving with added caution.
comes on while the engine is
running.
switched off. The BAS, ESP
®
, EBP and
Wheels may lock during hard braking,
reducing steering capability.
PRE-SAFE are also switched off (see
®
messages in the multifunction display).
̈
̈
Read and observe messages in the
multifunction display (୴ page 396).
The brake system is still functioning normally
but without the ABS available.
Have the system checked at an autho-
rized Mercedes-Benz Center as soon
as possible.
If the ABS control unit is malfunctioning, oth-
er systems such as the Parktronic system*,
Distronic*, or the automatic transmission
may also be malfunctioning.
Failure to follow these instructions in-
creases the risk of an accident.
The charging voltage has fallen below
When the voltage is above this value
again, the ABS is operational again and
10
volts. The ABS has switched off.
The battery might not be charged sufficiently. the ABS indicator lamp should go out.
If the ABS indicator lamp does not go out:
̈
Have the generator (alternator) and
the battery checked.
380
Product Specification
Categories | Mercedes-Benz E-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz E320 BlueTec, Mercedes-Benz E55 AMG, Mercedes-Benz E550, Mercedes-Benz W211 |
Model Year | 2007 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
lost manual,
can i download it please?
great car,but i lost manual and need one