Features of your vehicle
WINDSHIELD DEFROSTING AND DEFOGGING
D250000AHM
• For maximum defrosting, set the tem-
perature control to the extreme
WARNING - Windshield
right/hot position and the fan speed
control to the highest speed.
If warm air to the floor is desired while
defrosting or defogging, set the mode
to the floor-defrost position.
Before driving, clear all snow and ice
from the windshield, rear window, out-
side rear view mirrors, and all side win-
dows.
• Clear all snow and ice from the hood
and air inlet in the cowl grill to improve
heating
•
•
Do not use the
or
operation in
position
during
cooling
extremely humid weather. The dif-
ference between the temperature of
the outside air and the windshield
could cause the outer surface of
the windshield to fog up, causing
loss of visibility. In this case, set
OHM048119L
the mode selection to the
posi-
tion and fan speed control to a
lower speed.
heater and defroster efficiency and to Manual climate control system
reduce the probability of fogging up the
inside of the windshield.
D250101AEN
To defog inside windshield
1.
Set the fan speed to the desired posi-
tion.
2.
3.
4.
Select desired temperature.
Select the
or
position.
The outside (fresh) air and air condi-
tioning will be selected automatically.
If the air conditioning and outside (fresh)
air position are not selected automatical-
ly, press the corresponding button manu-
ally.
If the
position is selected, lower fan
speed is adjusted to a higher fan speed.
4
108
| Categories | Kia Borrego Manuals, Kia Manuals |
|---|---|
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)