Driving your vehicle
A service connector is equipped in your
E140800AHM
vehicle for the towing brake controller as Trailer light connector
shown. Link the connector to the towing
Your vehicle is equipped with a wire har-
brake controller with the sub wire har-
ness stored in the glove box.The detailed
explanation of the sub wire harness cir-
cuit is shown in the picture. Be sure to
position the towing brake controller
where it does not interfere with the driver
from operating the pedal.
We recommend that the sub wire har-
ness be stored in the glove box when it is
not in use.
ness stored in the rear end underbody.
Use it to connect and operate the trailer
lights. However, the trailer lights must
comply with federal, state/provincial and
local regulations. See your local recre-
ational vehicle dealer or rental agency for
the correct type of wiring and relays for
your trailer. Check for correct operation of
the turn signals, tail, back-up and stop
lights each time you hitch up. Direct splic-
ing may damage your vehicle's electrical
system and cause a malfunction of your
lights.
OHM068032N
E140700AHM
Service Connector for towing
brake controller
1
2
3
4
: Trailer brake (blue)
: Battery(+) (black)
: Stop light (red)
: Ground(-) (white)
5
60
| Categories | Kia Borrego Manuals, Kia Manuals |
|---|---|
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)