What to do in an emergency
OHM068009
OHM068010
OHM068011
6.
Loosen the wheel lug nuts coun- 7. Place the jack at the front or rear 8. Insert the jack handle into the jack
terclockwise one turn each, but do jacking position closest to the tire valve and turn it clockwise. Then
not remove any nut until the tire you are changing. Place the jack insert the jack handle into the
has been raised off the ground. at the designated locations under pump bracket and raise the vehi-
the frame. cle until the tire just clears the
ground. This measurement is
approximately 30 mm (1 in.).
Before removing the wheel lug
nuts, make sure the vehicle is sta-
ble and that there is no chance for
movement or slippage.
WARNING - Jack location
To reduce the possibility of
injury, be sure to use only the
jack provided with the vehicle
and in the correct jack position;
never use any other part of the
vehicle for jack support.
6
17
| Categories | Kia Borrego Manuals, Kia Manuals |
|---|---|
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)