Controls in detail
Driving systems
Setting to last stored speed
Deactivating Distronic
i Distronic deactivates automatically when
(“Resume”
function)
There are several ways to deactivate the
Distronic system:
ț
ț
you depress the parking brake pedal
the vehicle speed is below
Warning!
G
20 mph (30 km/h) (୴ page 223)
the ESP® is in operation or switched off with
the ESP® switch (୴ page 93)
̈
or
̈
Step on the brake pedal.
ț
ț
The set speed stored in memory should only
be set again if prevailing road conditions
permit. Possible acceleration or decelera-
tion differences arising from returning to the
preset speed could caused an accident
and/or serious injury to you and others.
Briefly push the cruise control lever in
you move the gear selector lever into
direction of arrow 3 (୴ page 223).
position N
An acoustic warning sounds and the
messageDTR Off appears in the multifunc-
tion display for approximately 5 seconds.
Distronic will be deactivated. The last set
speed will be stored into memory.
The following message appears in the mul-
tifunction display for approximately
G
̈
Briefly pull the cruise control lever in
direction of arrow 4 (୴ page 223).
Warning!
5
seconds: DTR Off
Distronic resumes the last stored
speed or, if no speed is stored, it will
set and store the current speed.
i The last stored set speed is deleted when
the engine is turned off.
Distronic switches off and releases the
brakes when the vehicle decelerates below
the minimum speed of 20 mph (30 km/h)
by operation of the system. At that time the
driver must apply the brakes in order to
reduce vehicle speed further or bring it to a
stop.
̈
Remove your foot from the accelerator
pedal.
225
| Categories | Mercedes-Benz Manuals, Mercedes-Benz SL-Class Manuals |
|---|---|
| Tags | Mercedes-Benz R230, Mercedes-Benz SL55 AMG, Mercedes-Benz SL550, Mercedes-Benz SL600, Mercedes-Benz SL65 AMG |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)