Practical hints
Flat tire
̈
̈
Keeping jack in this position, turn
crank 3 clockwise until the jack base
meets the ground. Make sure the jack
is vertical (plumb line).
Removing the wheel
Mounting the new wheel
Warning!
G
Continue to turn the crank until the tire
is a maximum of 1.2 in (3 cm) from the
ground.
Inflate spare wheel tire only after the wheel
is properly mounted.
Inflate the spare wheel tire using the
electric pump (୴ page 422) before lowering
the vehicle.
Alignment bolt
̈
Clean contact surfaces of wheel and
wheel hub.
1
̈
Unscrew upper-most wheel bolt and
remove.
̈ Guide the spare wheel onto the align-
ment bolt and push it on.
̈
Replace this wheel bolt with alignment
bolt 1 supplied in the tool kit.
̈ Insert wheel bolts and tighten them
slightly.
̈
Remove the remaining bolts.
!
Do not place wheel bolts in sand or dirt. This
could result in damage to the bolt and wheel hub
threads.
̈
Remove the wheel.
421
| Categories | Mercedes-Benz Manuals, Mercedes-Benz SL-Class Manuals |
|---|---|
| Tags | Mercedes-Benz R230, Mercedes-Benz SL55 AMG, Mercedes-Benz SL550, Mercedes-Benz SL600, Mercedes-Benz SL65 AMG |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)