Practical hints
Flat tire
Replacing jack support tube cover
MOExtended system*
Warning!
G
̈
Slide tongue of cover under the upper
edge of the tube opening.
The MOExtended system allows you to
continue driving your vehicle even if there
is a total loss of pressure in one or more
tires.
When turning the wheel wrench to tighten
the wheel bolts, make sure you position
hands on the wrench in such a way that you
avoid injury to yourself, such as scraping
your hands against the wheel. Make sure
turning the wheel wrench will not scratch or
damage the wheel rim.
̈ Applying even pressure, press cover
until it snaps into place.
Be careful not to damage the locking
tabs or clamp the plastic retaining
strap.
You may only use the MOExtended system
in conjunction with the Run Flat Indicator*
(Canada vehicles) (୴ page 303), TPMS
(U.S. vehicles) (୴ page 305), or Advanced
TPMS* (Canada vehicles) (୴ page 308).
̈
Before storing the jack in the trunk,
crank back to storage position and fold
in the arm.
!
The maximum distance in emergency
mode depends on the vehicle’s load. It is
miles (50 km) if the vehicle is partially
30
i For information on storing the spare wheel
back into the trunk, see “Storing the spare wheel
after use” (୴ page 402).
loaded and 18 miles (30 km) if the vehicle is
fully loaded.
The point at which the maximum driving distance
begins in emergency mode is when the warning
message appears in the multifunction display
indicating that there is a loss of tire inflation
pressure.
Do not exceed the maximum speed of
50
mph (80 km/h).
425
Product Specification
Categories | Mercedes-Benz Manuals, Mercedes-Benz SL-Class Manuals |
---|---|
Tags | Mercedes-Benz R230, Mercedes-Benz SL55 AMG, Mercedes-Benz SL550, Mercedes-Benz SL600, Mercedes-Benz SL65 AMG |
Model Year | 2008 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |