Operation
Tires and wheels
୴
୴
i Reactivate the TPMS after adjusting the tire ̈ Press the reset button (୴ page 27).
Checking tire pressure electronically
with the Advanced Tire Pressure Moni-
toring System (Advanced TPMS)*,
(Canada only)
inflation pressure to the inflation pressure rec-
The following message will appear in
ommended for the vehicle operating condition.
the multifunction display:
Restart tire
pressure monitor?
Tire pressure should only be adjusted on cold
tires. Observe the recommended tire inflation
pressure on the Tire and Loading Information
placard on the driver’s door B-pillar
i This device complies with RSS-210 of In-
dustry Canada. Operation is subject to the fol-
lowing two conditions:
̈
Press button æ.
(୴ page 294). Some vehicles may have supple-
mental tire inflation pressure information for
driving at high speeds (୴ page 301) or for vehi-
cle loads less than the maximum loaded vehicle
condition (୴ page 301). If such information is
provided, it can be found on the inside of the fuel
filler flap.
The following message will appear in
the multifunction display:
Tire Pressure Monitor
Restarted
(1)
(2)
This device may not cause interference, and
this device must accept any interference
received, including interference that may
cause undesired operation of the device.
After driving a few minutes the system
verifies that the current tire inflation
pressures are within the system’s
specified range. Afterwards the current
tire inflation pressures are accepted as
reference pressures and then moni-
tored.
Any unauthorized modification to this device
could void the user’s authority to operate the
equipment.
̈
̈
Switch on the ignition (୴ page 40).
Press button è or ÿ on the mul-
tifunction steering wheel repeatedly
until the standard display menu
The TPMS only functions on wheels that
are equipped with the proper electronic
sensors. It monitors the tire inflation pres-
sure, as selected by the driver, in all four
tires. A warning is issued to alert you to a
decrease in pressure in one or more of the
tires.
appears in the multifunction display
(
୴ page 149).
If you wish to cancel activation:
̈
Press button j or k repeatedly
until the following message appears in
the multifunction display:
Tire Pressure Monitor
Active
̈
Press button ç.
Tire pressure inquiries are made using the
multifunction display. The present inflation
pressures are displayed only after a few
minutes’ travel time.
Menu: R-button
308
| Categories | Mercedes-Benz Manuals, Mercedes-Benz SL-Class Manuals |
|---|---|
| Tags | Mercedes-Benz R230, Mercedes-Benz SL55 AMG, Mercedes-Benz SL550, Mercedes-Benz SL600, Mercedes-Benz SL65 AMG |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)