>
>
Bluetooth has been activated in the vehicle,
refer to page 168, and on the mobile phone.
The Bluetooth name of the vehicle is dis-
played.
Depending on the mobile phone, certain
settings may be necessary on the mobile
phone, e.g. via the following menu items:
Preparation via the mobile phone
6.
Further steps must be carried out with the
mobile phone and vary depending on the
model. Please refer to your mobile phone's
operating instructions, e.g. under the topics
of Searching for a Bluetooth device, Linking
or Pairing.
>
>
Bluetooth switched on
Connection must be allowed without
requiring further confirmation
>
Reconnection
The Bluetooth name of the vehicle appears
on the mobile phone display.
>
>
Depending on the mobile phone type, the
power-saving mode setting, for example,
may result in a paired mobile phone not
being detected by the vehicle.
7.
Select the Bluetooth name of the vehicle on
the mobile phone display.
For pairing purposes, define any 4 to 16-
digit number as a Bluetooth passkey,
Pairing
e.g. 25081107. A long and complex number
offers the best protection against unautho-
rized access. This Bluetooth passkey is no
longer required after pairing is successful.
Depending on your mobile phone, you will see
messages, first on the mobile phone display or
on the iDrive, requesting you to enter the same
Bluetooth passkey previously determined by
you.
>
The ignition is switched on.
Pair the mobile phone with the vehicle
only when the car is stationary, to avoid
endangering the car's occupants and other
8.
Enter the Bluetooth passkey.
Depending on the mobile phone, you will
have approx. 30 seconds to enter your
Bluetooth passkey on the mobile phone
and the Control Display.
road users by being distracted.<
Switch on ignition
1.
Insert remote control all the way into the
ignition lock.
2.
Switch on ignition without operating the
brake or clutch or pressing the start/stop
button.
Preparation via iDrive
3.
4.
5.
"Telephone"
"Bluetooth"
If the pairing was successful, the mobile phone
appears at the top of the list of mobile phones.
"Add new phone"
Following the initial pairing
>
The mobile phone is detected/connected in
the vehicle within 2 minutes if the engine is
running or the ignition is switched on.
>
As soon as a mobile phone is detected by
the vehicle, the phone book entries stored
on the SIM card or on your mobile phone are
transmitted to the vehicle. This transmis-
167
Online Edition for Part no. 01 41 2 602 846 - © 08/09 BMW AG
| Categories | BMW 1-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 128i, BMW 135i, BMW E82, BMW E88 |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)