consumers are switched off before locking the
Malfunctions
vehicle.<
Comfort Access may malfunction due to local
radio waves. If this happens, open and close the
vehicle via the buttons on the remote control or
using the integrated key. To start the engine
afterward, insert the remote control into the
ignition lock.
Coupe: Convenient closing
For Convenient closing, keep your finger on the
surface, arrow 2.
Convertible: window and convertible
top operation
Warning lamps
With the ignition at radio readiness or beyond,
you can open and close the windows and the
convertible top when a remote control is
located inside the vehicle.
The warning lamp in the instrument
cluster lights up when you attempt to
start the engine: the engine cannot
be started. The remote control is not inside the
vehicle or is malfunctioning. Take the remote
control with you inside the vehicle or have it
checked. If necessary, insert another remote
control into the ignition lock.
Unlocking the trunk lid separately
Press the button on the outside of the trunk lid.
This corresponds to pressing the
button.
The warning lamp in the instrument
cluster lights up while the engine is
running: the remote control is no
longer inside the vehicle. After the engine is
switched off, the engine can only be restarted
within approx. 10 seconds.
If the vehicle detects that a remote con-
trol has been accidentally left inside the
locked vehicle after the trunk lid is closed, the
lid will reopen. The hazard warning flashers
flash and a signal* sounds.<
Switching on radio readiness
The indicator lamp in the instrument
cluster comes on and a message
appears on the Control Display:
Radio readiness is switched on by pressing the
start/stop button, refer to page 55.
replace the battery in the remote control.
Do not depress the brake or the clutch;
otherwise, the engine will start immedi-
ately.<
Replacing the battery
The remote control for Comfort Access con-
tains a battery that will need to be replaced from
time to time.
Starting the engine
You can start the engine or switch on the igni-
tion when a remote control is inside the vehicle.
It is not necessary to insert a remote control into
the ignition lock, refer to page 55.
1.
Take the integrated key out of the remote
control, refer to page 26.
Switching off the engine in cars with
automatic transmission
The engine can only be switched off when the
selector lever is in position P, refer to page 56.
To switch the engine off when the selector lever
is in position N, the remote control must be in
the ignition lock.
2.
3.
Remove the cover.
Insert the new battery with the plus side fac-
ing up.
34
Online Edition for Part no. 01 41 2 602 846 - © 08/09 BMW AG
| Categories | BMW 1-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 128i, BMW 135i, BMW E82, BMW E88 |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)