2010 BMW 1-Series Owners Manual iDrive

4.
5.
Attach the connector, insert the bulb and
turn it all the way in the opposite direction.
Attach the headlamp cover.
Corner-illuminating lamps
H3 bulb, 55 watts
The figure shows the right-hand headlamp.
1.
2.
3.
Remove the top headlamp cover, using the
screwdriver to push the detents to one side.
1.
2.
Turn the respective wheel inwards.
Using a coin, turn both locks of the cover all
the way to the left, arrows 1, and remove the
cover.
3.
4.
Turn the bulb holder to the left and remove
it, arrow 2.
Apply gentle pressure to the bulb while
turning it to the right for removal and
replacement.
5.
6.
Insert the bulb holder and lock it by turning
it to the right.
Turn the bulb holder, see arrow, and
remove it.
Attach the cover by positioning the bottom
edge first and then turning both locks all the
way to the right.
Tail lamps
>
>
>
>
Turn signal:
PY21W bulb, 21 watts
Backup lamp:
W16W bulb, 16 watts
Brake lamps:
P21W bulb, 21 watts
Slide the bulb out of the holder and pull off
the connector.
Brake Force Display lamp:
H21W bulb, 21 watts
4.
5.
Replace the bulb and attach the connector.
Insert the bulb holder and turn it all the way
in the opposite direction.
6.
Attach the headlamp cover.
Turn signals, front
PY21W bulb, 21 watts
The turn signal bulb can be changed via a cover
in the wheel arch.
1
2
Inner brake lamp
Outer brake lamp
211
Online Edition for Part no. 01 41 2 602 846 - © 08/09 BMW AG
Product Specification
CategoriesBMW 1-Series Manuals, BMW Manuals
Tags, , ,
Model Year2010
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 250 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field