Possible displays
Display via iDrive
1.
2.
"Vehicle Info"
"Vehicle status"
3.
"Engine oil level"
1
2
Oil level OK
Oil level is being checked.
This can take about 3 minutes if the car is at
a standstill on a level surface, or about
Possible messages
5
minutes while the car is on the move.
>
"Engine oil level OK"
3
4
Oil level down to minimum:
Add engine oil as soon as possible, but no >
"Measurement not possible at this time."
more than 1 US quart/1 liter, refer also to
Adding engine oil on page 215.
>
"Measuring engine oil level...":
This can take about 3 minutes if the car is at
a standstill on a level surface and the engine
is running, and about 5 minutes while the
car is moving.
Oil level is too high.
Too much oil will harm the engine.
Have the vehicle checked without
delay.<
If engine oil was added, it may take up to
30
minutes to obtain an oil level reading.
5
The oil level sensor is defective.
Do not add engine oil. You can continue
your journey. Note the newly calculated dis-
tance remaining to the next oil service, refer
to page 73. Have the system checked as
soon as possible.
>
"Engine oil level below minimum. Add 1
quart!"
Add engine oil as soon as possible, but no
more than 1 US quart/1 liter, refer also to
Adding engine oil below.
If the oil level is below the minimum value,
add engine oil immediately to avoid engine
damage.
>
"Engine oil level too high! Have this
checked."
214
Online Edition for Part no. 01 41 2 603 085 - © 08/09 BMW AG
| Categories | BMW 3-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 328i, BMW 328xi, BMW 335i, BMW 335xi, BMW E92, BMW E93, Convertable, Coupe, iDrive |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)