Resuming stored desired speed and
distance
are currently not met. Calling up Check Control
messages, refer to page 78.<
Briefly press the button, arrow 4.
The stored speed and distance are regained
and maintained.
Warning lamps
The indicator 2 flashes in red; a
signal sounds.
The system indicates that you
In the following instances, the stored speed is
deleted and can no longer be resumed:
must brake and/or maneuver the
vehicle yourself. Active cruise con-
trol cannot automatically restore the distance to
the vehicle ahead.
This indicator does not release you from your
responsibility to adapt your desired speed and
driving style to prevailing driving conditions.
>
>
>
>
When driving stability control systems are
intervening
In cars with manual transmission: when you
shift gears very slowly or shift to neutral
In cars with automatic transmission: when
you engage selector lever position N
When the ignition is switched off
The indicator 2 flashes in yellow.
The prerequisites for operating
Displays in the instrument cluster
active cruise control are not met,
e.g. as a result of ABS or DSC
interventions. Active cruise control
is deactivated. You can reactivate the system, if
desired, by tapping or pulling the lever when
road and traffic conditions permit. It is not pos-
sible to resume a stored speed.
Radar sensor
1
2
Stored desired speed
Shows yellow: vehicle detected ahead
Flashes in red: system cannot maintain dis-
tance; driver must brake the vehicle
Flashes in yellow: driving stability control
systems are intervening; cruise control is
deactivated
The sensor's ability to detect vehicles ahead
may be restricted as a result of heavy rain, dirt,
snow or ice. If necessary, clean the radar sensor
located in the front bumper, see arrow. Be sure
to use particular care when removing any layers
of snow or ice from the sensor.
3
4
Selected distance to vehicle ahead
The indicator lights up as soon as the sys-
tem is activated.
Selected desired speed is temporarily dis-
played
The system cannot be activated if the sensor is
incorrectly aligned.
If --- mph or --- km/h temporarily appears
in the instrument cluster display, it is pos-
sible that the system prerequisites for operation
For US owners only
The transmitter and receiver units comply with
part 15 of the FCC/Federal Communications
66
Online Edition for Part no. 01 41 2 603 085 - © 08/09 BMW AG
| Categories | BMW 3-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 328i, BMW 328xi, BMW 335i, BMW 335xi, BMW E92, BMW E93, Convertable, Coupe, iDrive |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)