2010 BMW 3-Series Owners Manual iDrive

>
>
>
System has not been initialized
equipment by design, do not continue driv-
ing. Otherwise, a severe accident could
result if you continue driving.<
Driving on snowy or slippery road surface
Performance-oriented style of driving: slip
in the drive wheels, high lateral acceleration
2.
3.
At the next opportunity, check the air pres-
sure in all four tires.
>
Snow chains are attached
If all four tires are inflated to the cor-
rect pressures, the Flat Tire Monitor
might not have been initialized. The system
must then be initialized.<
Initializing the system
The initialization is completed during driv-
ing, which can be interrupted at any time.
When driving resumes, the initialization is con-
tinued automatically.
Do not initialize the system while snow chains
are attached.<
In the event of complete tire pressure loss,
0
psi/0 kPa, you can estimate the possible
distance for continued driving on the basis
of the following guidelines:
>
With a light load:
1 to 2 persons without luggage:
Approx. 155 miles/250 km
1.
2.
3.
"Vehicle Info"
"Vehicle status"
"Reset"
>
With a medium load:
2 persons, cargo area full, or 4 persons
without luggage:
Approx. 90 miles/150 km
>
With a full load:
4 persons, cargo area full:
Approx. 30 miles/50 km
Drive cautiously and do not exceed a
speed of 50 mph or 80 km/h; otherwise,
there is a risk of an accident. In the event of
pressure loss, vehicle handling changes. This
includes reduced tracking stability in braking,
extended braking distance and altered natural
steering characteristics.
4.
5.
6.
Start the engine – do not drive away.
Start the initialization using "Reset".
Start driving.
The initialization is completed during the trip.
"Status: Flat Tire Monitor active" is displayed
again on the Control Display.
If unusual vibration or loud noises occur during
the journey, this may be an indication that the
damaged tire has finally failed. Reduce your
speed and pull over as soon as possible at a
suitable location. Otherwise, parts of the tire
could come loose, resulting in an accident. Do
not continue driving. Instead, contact your
BMW center.<
Indication of a flat tire
The warning lamps come on in yellow
and red. A message appears on the
Control Display. In addition, an
acoustic signal sounds. There is a flat
tire or substantial loss of tire pressure.
Status display
The current status of the Flat Tire Monitor can
be displayed on the Control Display, e.g.
whether or not the FTM is active.
1.
Cautiously reduce speed to below 50 mph
or 80 km/h. Avoid sudden braking and
steering maneuvers. Do not exceed a speed
of 50 mph or 80 km/h.
1.
2.
"Vehicle Info"
If the car is not equipped with run-flat
tires, refer to page 210, the standard
"Vehicle status"
85
Online Edition for Part no. 01 41 2 603 085 - © 08/09 BMW AG
Product Specification
CategoriesBMW 3-Series Manuals, BMW Manuals
Tags, , , , , , , ,
Model Year2010
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 266 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field