2010 BMW 3-Series Owners Manual iDrive

10
the tilt alarm sensor are not activated.
seconds. The interior motion sensor and
The indicator lamp lights up briefly and then
flashes continuously. The tilt alarm sensor and
the interior motion sensor are switched off until
the next time the vehicle is unlocked and subse-
quently locked again.
>
>
The indicator lamp goes out after unlocking:
your vehicle has not been disturbed while
you were away.
If the indicator lamp flashes after unlocking
until the remote control is inserted in the
ignition, but for no longer than approx.
Comfort Access*
5
while you were away.
minutes: your vehicle has been disturbed
Comfort Access enables you to enter your vehi-
cle without needing to hold the remote control
in your hand. All you need to do is wear the
remote control close to your body, e.g. in your
jacket pocket. The vehicle detects the corre-
sponding remote control within the immediate
vicinity or in the passenger compartment.
Tilt alarm sensor
The tilt of the vehicle is monitored. The alarm
system reacts, e.g. to attempts to steal a wheel
or tow the vehicle.
Comfort Access supports the following func-
tions:
Interior motion sensor
Coupe
>
>
>
>
Unlocking/locking the vehicle
Unlocking the trunk lid separately
Engine starting
In order for the interior motion sensor to func-
tion properly, the windows and glass roof must
be completely closed*.
Convenient closing
Convertible
Functional requirement
The interior of the car is monitored up to the    >
height of the seat cushions. Thus the alarm sys-
tem is activated together with the interior
The vehicle or the trunk lid can only be
locked when the vehicle detects that the
remote control currently in use is outside of
the vehicle.
motion sensor even if the hardtop is open. The
alarm can be triggered unintentionally by falling
objects such as leaves, refer to Avoiding unin-
tentional alarms.
>
The vehicle cannot be locked or unlocked
again until after approx. 2 seconds.
>
The engine can only be started when the
vehicle detects that the remote control cur-
rently in use is inside the vehicle.
Avoiding unintentional alarms
The tilt alarm sensor and interior motion sensor
may be switched off at the same time. This pre-
vents unintentional alarms, e.g. in the following
situations:
Comparison to the standard remote
control
In general, there is no difference between using
Comfort Access or pressing the buttons on the
remote control to carry out the functions men-
tioned above. You should therefore first famil-
iarize yourself with the instructions on opening
and closing starting on page 26.
>
>
In duplex garages
During transport on car-carrying trains,
boats/ships or on a trailer
>
When animals are to remain in the vehicle
Switching off tilt alarm sensor and
interior motion sensor
Special features regarding the use of Comfort
Access are described below.
Press the
again as soon as the vehicle is locked.
button on the remote control
If you notice a brief delay while opening or
closing windows, the glass roof or retract-
33
Online Edition for Part no. 01 41 2 603 085 - © 08/09 BMW AG
Product Specification
CategoriesBMW 3-Series Manuals, BMW Manuals
Tags, , , , , , , ,
Model Year2010
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 266 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field