2010 BMW 3-Series Owners Manual iDrive

Too much oil will harm the engine.
Have the vehicle checked without
The engine oil quality is critical for the life of the
engine.
delay.<
Only use approved High Performance oil.
>
"Measurement inactive. Have this
checked."
Approved oils belong to the following viscosity
classes: SAE 0W-40, SAE 0W-30, SAE 5W-40
and SAE 5W-30.
Do not add engine oil. You can continue
your journey. Note the newly calculated dis-
tance remaining to the next oil service, refer
to page 73. Have the system checked as
soon as possible.
Alternative oil types
If the approved engine oils are not available, up
to 1 US quart/1 liter of another oil with the fol-
lowing specification may be used:
Adding engine oil
API SM or higher
Coolant
Do not add coolant to the cooling system
when the engine is hot. Escaping coolant
can cause burns.<
Coolant consists of half water and half additive.
Not all commercially available additives are suit-
able for your BMW. Ask your BMW center for
suitable additives.
Add up to 1 US quart/1 liter of engine oil only
after a corresponding message is shown on the
Control Display.
Add oil within the next 125 miles/200 km;
otherwise, the engine could be dam-
aged.<
Only use suitable additives; otherwise,
engine damage may result. Because
additives are harmful to your health, it is impor-
tant to follow the instructions on the contain-
ers.<
Keep oils, greases, etc. out of the reach of
children and comply with the relevant
warnings on the containers. Otherwise, health
hazards may result.<
Comply with the appropriate environ-
mental protection regulations when dis-
posing of coolant additives.<
Oil change
Have oil changed only at your BMW center or at
a workshop that works according to BMW
repair procedures with correspondingly trained
personnel.
Checking coolant level
1.
Do not open the engine hood before the
engine has cooled down.
2.
Turn the cap of the expansion tank a little
counterclockwise to allow any accumulated
pressure to escape, then continue turning
to open.
Oil types
Do not use oil additives as this could
result in engine damage.<
3.
The coolant level is correct if it is between
the maximum and minimum marks in the
Specified engine oils
Your service center can advise you on which
engine oils have been approved by the manu-
facturer of your vehicle.
215
Online Edition for Part no. 01 41 2 603 085 - © 08/09 BMW AG
Product Specification
CategoriesBMW 3-Series Manuals, BMW Manuals
Tags, , , , , , , ,
Model Year2010
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 266 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field