System limits
>
approaching large and/or highly reflective
signs
The High-beam Assistant is designed to
maximize the amount of time that high >
beams can be safely used and to quickly switch
approaching certain lights, such as drive-
way lighting and porch lights
back to low beams when traffic approaches.
The system cannot completely replace driver
intervention when unusual conditions are
>
approaching certain traffic signals
approaching large reflective markers
>
In these situations, the system may interpret
the above conditions as a vehicle ahead requir-
ing a switch to low beams. When the conditions
return to normal, the system will reactivate the
high beams.
encountered. For this reason, switch to low
beams when circumstances so dictate. Failure
to do so can pose a safety risk.<
Below are a few examples of situations in which
the system may not react or may only function
to a limited degree, requiring personal interven-
tion:
The High-beam Assistant cannot replace the
driver's responsibility for complying with state
laws on high-beam switching or for adapting to
visibility and traffic conditions.
>
in extremely unfavorable weather condi-
tions such as fog or heavy precipitation
>
in sensing road users with poor inherent
illumination such as pedestrians, cyclists,
equestrians, horse-drawn vehicles, railroad
or shipping traffic close to the road, and at
deer crossings
Switching off via iDrive
iDrive, for operating principle refer to page 16.
1.
2.
3.
"Settings"
"Lighting"
>
>
in tight curves, on steep crests or dips, with
cross-traffic, or with partially hidden
oncoming traffic on divided highways
"High beam assistant"
in poorly illuminated areas and in the pres-
ence of highly reflective signs
>
>
in the low speed range
when the windshield is fogged up, dirty or
covered with stickers, decals etc. in the area
of the inside rearview mirror
>
when the sensor is dirty. Clean the sensor
on the front side of the inside rearview mir-
ror with a cloth slightly moistened with glass
cleaner
High beam assistant is activated and is
stored for the remote control currently in use.
Moreover, no system can operate without limi-
tations. High-beam Assistant operation is sub-
ject to conditions that may reduce the system's
ability to recognize the difference between
actual vehicle head lamps or tail lamps and, for
example, highly reflective signs, markers, and
streetlights. To be on the safe side, the system
may periodically interpret these situations as
conditions that require low beams. Below are
some of the situations in which premature
switching to low beams can occur:
101
Online Edition for Part no. 01 41 2 602 716 - © 08/09 BMW AG
| Categories | BMW 6-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 650i, BMW E63, BMW E64 |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
Comments are closed.