8.
9.
From the outside, both persons pull the
front frame of the convertible top down-
ward, as simultaneously as possible on the
two sides.
3. Push the securing pin 3 out until it engages.
Turn the Allen wrench in the direction of the
arrow until the front convertible top frame is
locked to the windshield frame.
The rear convertible top ends are automati-
cally pressed onto the convertible top com-
partment lid and close tightly with tension.
10.
If necessary, close the rear window again
manually in the same way as above.
4.
Unfold the rear mounts 4.
Installing
Wind deflector*
1.
Insert the securing pin 1 of the wind deflec-
The wind deflector keeps the air movement in
the passenger compartment to a minimum
when the convertible top is open, thus enabling
pleasant driving even at higher speeds.
tor into the appropriate opening on the right
side of the vehicle.
The wind deflector is stowed in a protective
sleeve in the luggage compartment. Short
instructions for use are also provided on the
protective sleeve.
Before installing
1.
Remove the wind deflector from the protec-
tive sleeve and fold it open, refer to
arrows 1.
2.
3.
Guide the rear mounts 2 into the recepta-
cles provided.
Push the securing pin 3 on the left side into
the appropriate opening until it snaps into
place.
2.
Press the upper and lower section together
until the locking device engages, refer to
arrow 2.
4.
Fold up the upper half 4 of the wind deflec-
tor.
With wind deflector fitted: do not incline
the front seat backrests too far backward
if the seat is to be moved back to the end posi-
43
Online Edition for Part no. 01 41 2 602 716 - © 08/09 BMW AG
| Categories | BMW 6-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 650i, BMW E63, BMW E64 |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
Comments are closed.