Defrosting windows and removing
condensation
required, according to the temperature setting.
This function is only available when the engine
is running.
Quickly remove ice and condensa-
tion from the windshield and front
side windows.
The cooling function helps to avoid condensa-
tion on the window surfaces or to quickly
remove them.
To do this, also switch on the cooling function.
Depending on the weather, the windshield may
fog over briefly when the engine is started.
Rear window defroster
The rear window defroster
switches off after a while.
Convertible: the rear window
The cooling function is also switched on with
the AUTO program.
defroster is only activated when the rear win-
dow is closed.
Depending on the vehicle equipment, upper
wires are used as an antenna and are not part of
the rear window defroster.
Maximum cooling
Maximally cooled air is obtained as
quickly as possible at an outside
temperature above approx. 327/
0
6 and with the engine running.
At the lowest temperature, the automatic cli-
mate control switches into recirculating air
mode. The maximum air volume flows out of the
vents for the upper body. Therefore, open these
vents for maximum cooling.
Air volume, manual
You can adjust the air volume by
turning. You can reactivate the
automatic mode for the air volume
with the AUTO button.
The air volume is reduced to save battery
power. The display stays the same.
AUC Automatic recirculated-air
control/recirculated-air mode
You can respond to pollutants or
unpleasant odors in the immediate
environment by suspending the
supply of outside air. The system then recircu-
lates the air currently within the vehicle. During
AUC operation, a sensor detects pollutants in
the outside air and controls the shut-off auto-
matically.
Air distribution, manual
You can route the air flowing out into the vehicle
interior via various programs, separately for the
driver's and passenger's side:
>
>
>
>
>
Upper body region
Upper body region and footwell
Footwell
By pressing the button repeatedly, you can
request three operating modes:
Driver's side: windows and footwell
Individual program
>
>
LED off: outside air flows in continuously.
Right LED on, AUC mode: the system
detects pollutants in the outside air and
shuts off the supply as needed.
Selecting program
Press the button repeatedly until
the desired air distribution of the
respective program is shown on
the Control Display.
>
Left LED on, recirculated-air mode: the
supply of outside air is permanently shut off.
Should the windows fog up in the recircu-
lated-air mode, press the AUTO button or
Switching cooling function on and off
switch off the recirculated-air mode and
increase the air volume if necessary.
The recirculated-air mode should not be used
over an extended period of time, as the air qual-
The cooling function cools and
dehumidifies the incoming air
before also reheating it as
105
Online Edition for Part no. 01 41 2 602 716 - © 08/09 BMW AG
| Categories | BMW 6-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 650i, BMW E63, BMW E64 |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
Comments are closed.