X204_AKB; 2; 62, en-US
d2ureepe,
2009-05-11T16:56:41+02:00 - Seite 108
Version: 2.11.8.1
Instrument cluster
108
range indicator disappears from the
multifunction display.
The automatic transmission will shift from
the current gear range directly into drive
position D.
! Only conduct operational or performance
tests on a two-axle dynamometer. If such
tests are necessary, contact an authorized
Mercedes-Benz Center. You could
otherwise seriously damage the brake
system or the transfer case which is not
covered by the Mercedes-Benz Limited
Warranty.
Shifting into optimal gear range
X Press and hold the gear selector lever to
the left in the D- direction.
! Because the ESP® operates
The automatic transmission will select the
gear range suited for optimal acceleration
and deceleration automatically. This will
involve shifting down one or more gears.
automatically, the engine and ignition must
be shut off (SmartKey in starter switch
position 0 or 1) when
Rthe parking brake is being tested on a
brake test dynamometer
Rtowing the vehicle with the front or rear
axle raised (not permissible for vehicles
with 4MATIC)
Emergency operation (limp-home
mode)
If vehicle acceleration becomes less
responsive or sluggish or the automatic
transmission no longer shifts, the automatic
transmission is most likely operating in limp-
home (emergency operation) mode. In this
mode only second gear and reverse gear R
can be selected.
Active braking action through the ESP®
may otherwise seriously damage the brake
system which is not covered by the
Mercedes-Benz Limited Warranty.
Instrument cluster
Introduction
X Stop the vehicle in a safe location.
X Shift the automatic transmission into park
position P.
For a full view illustration of the instrument
cluster, see “Instrument cluster”
X Turn off the engine.
X Wait at least 10 seconds before restarting. (Y page 28).
X Restart the engine.
X Shift the automatic transmission into drive
position D (for second gear) or reverse gear
R.
G Warning!
No messages will be displayed if either the
instrument cluster or the multifunction
display is inoperative.
X Have the automatic transmission checked
at an authorized Mercedes-Benz Center as
soon as possible.
As a result, you will not be able to see
information about your driving conditions,
such as
Rspeed
Routside temperature
Rwarning/indicator lamps
Transfer case
This section applies to vehicles equipped with
all-wheel drive (4MATIC) only. Both the front
and rear axles are powered at all times when
the vehicle is being operated.
Rmalfunction/warning messages
Rfailure of any systems
Driving characteristics may be impaired.
Categories | Mercedes-Benz GLK-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz GLK350, Mercedes-Benz X204 |
Model Year | 2010 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5) Automotive readers have rated 2010 Mercedes-Benz GLK350 GLK350 4MATIC X204 Owners Manual 5.0 out of 5.0 based on 1 product reviews.
Excellent Luxury auto