X204_AKB; 2; 62, en-US
d2ureepe,
2009-05-11T16:56:41+02:00 - Seite 314
Version: 2.11.8.1
Flat tire
314
X Attach reversible ratchet? to jack=
in
such a way that the word UP can be seen.
X Place jack= on firm ground.
X Position jack= under take-up
bracket; so that it is always vertical as
seen from the side, even if the vehicle is
parked on an incline.
X On the wheel to be changed, loosen but do
not yet remove the wheel bolts
(approximately one full turn with wheel
wrench:).
X Assemble the jack (Y page 261).
The jack take-up brackets are located directly
behind the front wheel housings and in front
of the rear wheel housings.
X Turn ratchet? up and down until jack=
is fully seated in take-up bracket; and the
jack base evenly meets the ground.
X Jack up the vehicle until the wheel is a
maximum of 1.2 in (3 cm) from the ground.
G Warning!
The jack is designed exclusively for jacking up
the vehicle at the jack take-up brackets. Make
sure the jack arm is fully seated in the jack
take-up bracket.
If you do not position the jack correctly in the
jack take-up bracket, the vehicle can fall off
the jack and seriously or fatally injure you or
others.
Removing the wheel
X Unscrew and remove the wheel bolts.
!
Do not place wheel bolts in sand or dirt.
This could result in damage to the wheel
bolts and wheel hub threads.
!
the vehicle, as this may cause damage to
the vehicle.
Do not position the jack on the body of
X Remove the wheel.
Attaching the spare wheel
G Warning!
Inflate collapsible tire only after the wheel is
properly attached.
Inflate the collapsible tire using the electric
air pump before lowering the vehicle.
G Warning!
Always replace wheel bolts that are damaged
or rusted.
Product Specification
Categories | Mercedes-Benz GLK-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz GLK350, Mercedes-Benz X204 |
Model Year | 2010 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Excellent Luxury auto