X204_AKB; 2; 62, en-US
d2ureepe,
2009-05-11T16:56:41+02:00 - Seite 51
Version: 2.11.8.1
Occupant safety
51
If after these 6 seconds the driver’s or the
The ETDs are designed to activate in the
following cases:
front passenger’s seat belt (with the front
passenger seat occupied) is not fastened with
front doors closed,
Rin frontal or rear-end impacts exceeding
the system’s preset deployment threshold
Rthe seat belt telltale7 remains
illuminated for as long as either the driver’s
or front passenger’s seat belt is not
fastened.
Rin side impacts exceeding the system’s
preset deployment threshold on the far
side of the impact
Rin certain vehicle rollovers
Rand if the vehicle speed once exceeds
Rif the restraint systems are operational and
functioning correctly, see “SRS indicator
lamp” (Y page 36)
15
7
mph (25 km/h), the seat belt telltale
starts flashing and a warning chime
sounds with increasing intensity for a
maximum of 60 seconds or until the
The ETDs for the front seats will only activate
driver’s and front passenger’s seat belt are if the front seat belts are fastened (latch plate
fastened.
properly inserted into buckle).
If you and/or your passenger release the
seat belt during driving, the seat belt
telltale7 starts flashing and the
The ETDs for the rear outer seats will activate
with or without the respective seat belts
fastened.
warning chime sounds as described before. In an impact, the ETDs remove slack from the
If the driver’s or the front passenger’s seat seat belts in such a way that the seat belts fit
belt remains unfastened after 60 seconds, more snugly against the body. Seat belt force
the warning chime stops sounding, the seat limiters, when activated, are employed to
belt telltale7 stops flashing but
continues to be illuminated.
help reduce the peak force exerted by the
seat belts on occupants during a crash.
After a vehicle standstill, the warning chime
is reactivated and the seat belt telltale
i The ETDs do not correct an incorrect seat
position or incorrectly worn seat belts.
The ETDs do not pull occupants back
toward the seat backrest.
7
is flashing again if the vehicle speed
once exceeds 15 mph (25 km/h).
The seat belt telltale7 will only go out if
both the driver’s and the front passenger’s
seat belt (with the front passenger seat
occupied) are fastened, or the vehicle is
standing still and a front door is opened.
G Warning!
Pyrotechnic ETDs that were activated must be
replaced.
For your safety, when disposing of the
pyrotechnic ETDs always follow our safety
instructions. These are available at any
authorized Mercedes-Benz Center.
For more information, see “Practical hints”
(
Y page 292).
Emergency Tensioning Device (ETD),
seat belt force limiter
NECK-PRO active front head
restraints
The seat belts for the front seats and rear
outer seats are equipped with ETDs and seat
belt force limiters.
The NECK-PRO active front head restraints
are intended to offer the driver and front
passenger increased protection from
whiplash-type injuries. In the event of a rear-
end collision, the NECK-PRO active front head
Z
| Categories | Mercedes-Benz GLK-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz GLK350, Mercedes-Benz X204 |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Automotive readers have rated 2010 Mercedes-Benz GLK350 GLK350 4MATIC X204 Owners Manual 5.0 out of 5.0 based on 1 product reviews. Excellent Luxury auto