X204_AKB; 2; 62, en-US
d2ureepe,
2009-05-11T16:56:41+02:00 - Seite 306
Version: 2.11.8.1
Replacing bulbs
306
Before you start to replace a bulb for a front
lamp, do the following:
X Switch off the ignition.
X Turn the exterior lamp switch to position
$
.
X Open the hood (Y page 214).
X Remove the cover above the respective
headlamp (Y page 306).
X Driver’s side only: Release the washer fluid
reservoir (Y page 306).
X Releasing: Turn screw;
Removing/installing cover above
headlamp
counterclockwise and remove it.
X Tilt washer fluid reservoir: to the side as
far as necessary to access the headlamp
bulbs.
X Fixing: Tilt washer fluid reservoir: back
into fixing position.
X Fasten screw; by turning it clockwise.
Low-beam bulb (halogen headlamps
only)
Example illustration: Passenger side
X Removing: Press tab: in direction of
arrow and pull cover; upward out of the
retainer.
X Pull cover; off of cover=
.
X Reinstalling: Insert the soft, front edge of
cover; sideways into the gap between
fender and headlamp.
X Stick cover; onto cover= so that they X Turn housing cover: counterclockwise
are flush with each other.
and remove it.
X Press cover; down into the front retainer X Pull electric plug; off bulb?
until tab: engages.
.
X Remove wire clip= from bulb holder by
pushing down and release from arrestor
hook.
X Pull bulb? at its socket out of bulb holder.
Releasing/fixing the washer fluid
reservoir
X Insert the new bulb so that its socket
locates in the recess of bulb holder and is
level to it.
To replace bulbs of the driver’s side
headlamp, the washer fluid reservoir in the
engine compartment must be released.
Product Specification
Categories | Mercedes-Benz GLK-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz GLK350, Mercedes-Benz X204 |
Model Year | 2010 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Excellent Luxury auto