X204_AKB; 2; 62, en-US
d2ureepe,
2009-05-11T16:56:41+02:00 - Seite 57
Version: 2.11.8.1
Occupant safety
57
X Move the respective head restraint: to
Once hook? is attached, the child restraint
itself can be secured.
its uppermost position (Y page 80).
X Release the rear seat backrest
X Install the child restraint system and
tighten top tether strapA according to the
child restraint manufacturer’s instructions.
(
Y page 189).
X Fold the rear seat backrest slightly forward.
Child seat anchors – LATCH-type
(ISOFIX)
G Observe Safety notes, see page 53.
G Warning!
Children too big for a toddler restraint must
ride in seats using regular seat belts. Position
shoulder belt across chest and shoulder, not
face or neck.
A booster seat may be necessary to achieve
proper seat belt positioning for children over
X Guide top tether strapA between head
restraint: and top of the seat backrest.
X Securely fasten hook?, which is part of
top tether strapA, to anchorage ring=.
41
lb (18 kg) until they reach a height where
a lap/shoulder belt fits properly without a
booster.
Install child seat according to manufacturer’s
instructions.
Make sure
Rhook? is attached to anchorage ring=
beyond the safety catch, as illustrated
The child seat must be firmly attached to both
anchors.
Rtop tether strapA is not twisted
An incorrectly mounted child seat may come
loose during an accident which could result in
serious injury or death to the child.
Rhead restraint: is installed and
positioned such that top tether strapA
can pass freely between head restraint:
and top of the seat backrest
Damaged or impact damaged child seats or
child seat mounting fittings must be replaced.
Rtop tether strapA is positioned between Each rear outer seat has two LATCH-type
the seat backrest and cargo compartment (ISOFIX) anchors for the installation of a
cover blind; (if installed)
LATCH-type (ISOFIX) child seat with matching
mounting fittings.
Non-LATCH-type (ISOFIX) child seats may
also be used and can be installed using the
vehicle’s seat belt system. Install child seat
according to the manufacturer’s instructions.
X Swing the rear seat backrest to the rear
until it engages.
The red indicator is no longer visible.
X Check the rear seat backrest to be locked
in its upright position (Y page 190).
The LATCH-type (ISOFIX) anchors are located
between the seat cushion and the backrest.
G Observe Safety notes, see page 190.
X Lower head restraint: if necessary
(
Y page 81).
Z
| Categories | Mercedes-Benz GLK-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz GLK350, Mercedes-Benz X204 |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Automotive readers have rated 2010 Mercedes-Benz GLK350 GLK350 4MATIC X204 Owners Manual 5.0 out of 5.0 based on 1 product reviews. Excellent Luxury auto