Switching on/off manually
Cameras
Press the button.
The two camera lenses are located on the sides
of the bumper.
The image quality may be impaired by dirt.
Clean the lens, refer to page 252.
Display on the Control Display
The traffic area to the left and right is displayed
on the Control Display.
Top View*
The concept
Top View assists you in parking and maneuver‐
ing. The area around the doors and the road area
around the vehicle are shown on the Control
Display for this purpose.
Capturing the image
Guidelines at the bottom of the image show the
position of the front of the vehicle.
The image is captured by two cameras inte‐
grated in the exterior mirrors and by the backup
camera.
Brightness
The range equals:
With the Side View switched on:
▷
▷
approx. 10 ft/3 m to the side.
approx. 7 ft/2 m to the rear.
1.
2.
Select the symbol.
Turn the controller until the desired setting
is reached and press the controller.
In this way, obstacles up to the height of the ex‐
terior mirrors are detected early.
Contrast
System limits
With the Side View switched on:
Top View cannot be used in the following situa‐
tions:
1.
2.
Select the symbol.
▷
▷
▷
▷
With a door open.
Turn the controller until the desired setting
is reached and press the controller.
With the trunk lid open.
With an exterior mirror folded in.
In poor light.
A Check Control message is displayed in some
of these situations.
115
Online Edition for Part no. 01 41 2 603 958 - 03 10 500
| Categories | BMW 7-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW Active Hybrid, BMW F01, BMW F02, BMW F03, BMW F04 |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)