2.
Raise the floor panel in the trunk.
Have the malfunction corrected
If the parking brake has been released
manually in response to a malfunction, only
technicians can return it to operation.
Have the malfunction corrected by your service
center.◀
Automatic Hold
The concept
3.
Take out the floor trim in the trunk, removing
the screws with the release tool, arrow.
This system assists the driver by automatically
setting and releasing the parking brake, such as
when moving in stop-and-go traffic.
The vehicle is automatically held in place when
it is stationary.
On inclines, the system prevents the vehicle
from rolling backward when driving away.
4.
Place the release tool on the release point,
arrow.
For your safety
AutomaticHoldisdeactivatedautomaticallyand
the parking brake is set when:
▷
▷
The engine is switched off.
A door is opened and the driver's safety belt
is unbuckled.
5.
Forcefullypullthereleasetoolupagainstthe
resistance until you notice a marked in‐
crease in the resistance and the parking
brake releases audibly.
▷
The vehicle is braked to a standstill with the
parking brake while driving.
The indicator lamp switches from green
to red and the letters AUTO H go out.
Indicator lamp in Canadian models
Before driving away:
▷
Release the parking brake manually.
▷
Reactivate Automatic Hold.
Leaving the vehicle with the engine run‐
ning
70
Online Edition for Part no. 01 41 2 603 958 - 03 10 500
| Categories | BMW 7-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW Active Hybrid, BMW F01, BMW F02, BMW F03, BMW F04 |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)