Display
1.
Activate Night Vision with pedestrian detec‐
tion.
Heat image
2.
3.
Press the controller.
Open the desired menu item.
▷
▷
▷
1: "Brightness"
2: "Contrast"
3: "Pedestrian detection"
For safety reasons, when driving at speeds
above approx. 3 mph/5 km/h and in low ambient
light, the image is only displayed when the low
beams are switched on.
A still image is displayed at regular intervals for
a fraction of a second.
The settings are stored for the remote control
currently in use.
Night Vision with pedestrian detection is not
available on the rear screen.
Camera
Pedestrian detection
Rain, dirt, snow, or ice can impair camera oper‐
ation.
Environmental influences can limit the availabil‐
ity of pedestrian detection. If pedestrian detec‐
tion is not available, a symbol is displayed in the
heat image.
The camera is automatically heated when the
external temperatures are low.
The camera is automatically cleaned together
with the headlamps.
This symbol disappears when the function be‐
comes available again.
Clean the lens, refer to page 252.
The pedestrian detection and warning system
only operates in darkness and only when a heat
image is displayed.
Adjustments via the iDrive
With Night Vision switched on:
119
Online Edition for Part no. 01 41 2 603 958 - 03 10 500
| Categories | BMW 7-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW Active Hybrid, BMW F01, BMW F02, BMW F03, BMW F04 |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)