Interior equipment
Integrated universal remote
control*
Programming
The concept
This system can replace up to three different
hand-held transmitters for various types of re‐
mote-controlled equipment, such as garage
doors or lighting systems.
The hand-held transmitter signal can be pro‐
grammed on one of the three memory buttons.
▷
▷
LED, arrow 1.
The corresponding device can then be operated
using the programmed memory button.
Memory buttons, arrow 2.
The LED indicates that a signal is being trans‐
mitted.
Fixed-code hand-held transmitters
1.
2.
Switch on the ignition.
When selling the vehicle, delete the stored pro‐
grams for security reasons.
Initial setup:
Press both outer buttons 1 and 3 for approx.
During programming
20
seconds until the LED flashes.
During programming and before activat‐
ing a device using the universal remote control,
ensure that there are no people, animals, or ob‐
jects in the range of movement of the remote-
controlled device; otherwise, there is a risk of
injury or damage.
All programs of the three memory buttons,
arrow 2, are cleared.
3.
4.
Hold the hand-held transmitter at a distance
of approx. 2 to 8 in/5 to 20 cm from the mem‐
ory buttons.
Simultaneously press the transmit button of
the hand-held transmitter and the memory
button of the universal remote control.
Also follow the safety instructions of the hand-
held transmitter.◀
Compatibility
The LED flashes slowly.
If this symbol is printed on the packaging
or in the instructions of the hand-held
transmitter, the remote-controlled de‐
vice is generally compatible with the universal
remote control.
5.
Release both buttons when the LED flashes
rapidly.
If the LED does not flash rapidly after approx.
15
seconds, change the distance and repeat
the step.
If you have any questions, please contact:
The device can be operated using the memory
button with the engine running or the ignition
switched on.
▷
▷
Your service center.
www.homelink.com on the Internet.
Malfunction
If the device cannot be used after repeated at‐
tempts at programming, please check whether
the hand-held transmitter is equipped with an
alternating code system.
129
Online Edition for Part no. 01 41 2 603 958 - 03 10 500
| Categories | BMW 7-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW Active Hybrid, BMW F01, BMW F02, BMW F03, BMW F04 |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)