2.
3.
4.
5.
For better accessibility, tilt the backrest
back slightly.
Mount the child restraint fixing system; refer
to the operating instructions of the system.
Ensure that both LATCH anchors are prop‐
erly connected.
After mounting, move the backrest back up
slightly so that the child restraint fixing sys‐
tem rests lightly against the backrest.
1
2
3
4
5
6
7
Direction of travel
Head restraint.
Child restraint fixing systems with a
tether strap
Hook for upper retaining strap
Mounting point/eye
Rear window shelf
Seat backrest
Mounting points
Upper retaining strap
Attaching the upper retaining strap to
the mounting point
1.
2.
Remove the mounting point cover.
Raise the head restraint. Do not change the
middle head restraint*.
Depending on the vehicle equipment, there are
two outer or three mounting points for child re‐
straint fixing systems with a tether strap.
3.
Guide the upper retaining strap between the
supports of the head restraint.
Guide it over the head restraint of the middle
seat.
LATCH mounting eyes
4.
5.
6.
Attach the hooks of the retaining strap to the
mounting eyes.
Only use the mounting eyes for the upper
LATCH retaining strap to secure child restraint
fixing systems; otherwise, the mounting eyes
could be damaged.◀
Tighten the retaining strap by pulling it
down.
Lower the head restraint.
Retaining strap guide
Retaining strap
Make sure the upper retaining strap does
not run over sharp edges and is not twisted as it
passes to the top anchor. Otherwise, the strap
will not properly secure the child restraint fixing
system in the event of an accident.◀
64
Online Edition for Part no. 01 41 2 603 958 - 03 10 500
| Categories | BMW 7-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW Active Hybrid, BMW F01, BMW F02, BMW F03, BMW F04 |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)