Features of your vehicle
Programming HomeLink
✽
®
1.
2.
Press and hold the
button for more
than 6 seconds. When the compass
memory is cleared a "C" will appear in
the display.
CAUTION
®
Before programming HomeLink to
NOTICE
• When programming a garage door
opener, it is advised to park the vehi-
cle outside of the garage.
• It is recommended that a new battery
be placed in the hand-held transmit-
ter of the device being programmed to
a garage door opener or gate oper-
ator, make sure that people and
objects are out of the way of the
device to prevent potential harm or
To calibrate the compass, drive the
vehicle in 2 complete circles at less
than 5 mph (8 km/h).
damage. Do not use HomeLink
®
with any garage door opener that
lacks the safety stop and reverse
features required by U.S. federal
safety standards (this includes any
garage door opener model manu-
factured before April 1, 1982). A
garage door that cannot detect an
object - signaling the door to stop
and reverse - does not meet current
U.S. federal safety standards. Using
a garage door opener without these
features increases the risk of seri-
ous injury or death.
HomeLink for quicker training and
®
accurate transmission of the radio-
frequency signal.
Some vehicles may require the igni-
tion switch to be turned to the second
(or "accessories") position for pro-
Integrated HomeLink Wireless Control
®
System
The
HomeLink®
Wireless
Control
•
•
System provides a convenient way to
replace up to three hand-held radio-fre-
quency (RF) transmitters with a single
built-in device.This innovative feature will
learn the radio frequency codes of most
current transmitters to operate devices
such as gate operators, garage door
openers, entry door locks, security sys-
tems, even home lighting. Both standard
and rolling code-equipped transmitters
can be programmed by following the out-
gramming
HomeLink.
and/or
operation of
In the event that there are still pro-
gramming difficulties or questions
after following the programming steps
listed below, contact HomeLink at:
®
1-800-355-
www.homelink.com or
3515.
Retain the original transmitter of the RF
device you are programming for use in
other vehicles as well as for future
lined procedures. Additional HomeLink
information can be found at: www.home-
link.com or by calling 1-800-355-3515.
®
HomeLink
®
programming.
It is also sug-
gested that upon the sale of the vehicle,
the programmed HomeLink buttons be
erased for security purposes.
®
4
42
| Categories | Hyundai Manuals, Hyundai Genesis, Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Genesis |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)