Driving your vehicle
The LDWS does not operate
when:
The LDWS may not warn you even • The distance from vehicle ahead is
if the vehicle leaves the lane, or
very short or the vehicle ahead drives
may warn you even if the vehicle
hiding the lane line.
does not leave the lane when:
•
The driver turns on the turn signal to
change lane.
• The vehicle shakes heavily.
•
The
lane
number
increases
or
However, when the hazard warning
flasher is operating, the LDWS oper-
ates normally.
• The lane can't be visible due to snow,
rain, stain, a puddle or many other
things.
• The brightness outside changes sud-
denly.
decreases or the lane lines are cross-
ing.
Putting something on the dashboard.
• Driving with the sun in front of you.
• Driving in areas under construction.
• The lane line is more than two.
•
•
•
Operating the wiper switch with HI
mode due to heavy rain.
Driving on the lane line.
• Not turning on the headlights at night
or in a tunnel.
✽
To change lane, operate the turn signal
switch then change the lane.
NOTICE
• Difficult to distinguish the color of the
lane marking from the road.
•
•
Driving on a steep grade or a curve.
Light reflects from the water on the
road.
•
•
The lens or windshield is stained with
foreign matter.
The sensor cannot detect the lane
because of fog, heavy rain or heavy
snow.
•
The surrounding of the inside rear view
mirror temperature is high due to a
direct sun light.
•
•
•
The lane is very wide or narrow.
The lane line is damaged or indistinct.
A shadow is on the lane line by a medi-
an strip.
•
•
There is a mark that looks like lane line.
There is a boundary structure.
5
52
| Categories | Hyundai Manuals, Hyundai Genesis, Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Genesis |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)