Maintenance
3.
4.
Remove the socket from the assembly
by turning the socket counterclockwise
until the tabs on the socket align with
the slots on the assembly.
Remove the bulb from the socket by
pressing it in and rotating it counter-
clockwise until the tabs on the bulb
align with the slots in the socket. Pull
the bulb out of the socket.
5.
6.
Insert a new bulb by inserting it into
the socket and rotating it until it locks
into place.
Install the socket in the assembly by
aligning the tabs on the socket with the
OBH078035
OBH078036
G220400AEN
G220500AEN
slots in the assembly. Push the socket High mounted stop light
License plate light bulb replace-
ment
1. Loosen the lens retaining screws with
a philips head screwdriver.
into the assembly and turn the socket
clockwise.
replacement
If the light is not operating, have the vehi-
cle checked by an authorized HYUNDAI
dealer.
7.
Install the service cover by putting it
into the service hole.
2. Remove the lens.
3.
Remove the bulb by pulling it straight
out.
Install a new bulb.
Reinstall the lens securely with the
lens retaining screws.
Back-up, stop and tail light
If the light is not operating, have the vehi-
cle checked by an authorized HYUNDAI
dealer.
4.
5.
7
57
| Categories | Hyundai Manuals, Hyundai Genesis, Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Genesis |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)