Maintenance
G201005AUN
G2010007AEN-EU
Traction - AA, A, B & C
The traction grades, from highest to
Quality grades can be found where lowest, are AA, A, B and C. Those
This number is the greatest amount applicable on the tire sidewall grades represent the tire’s ability to
of air pressure that should be put in between tread shoulder and maxi- stop on wet pavement as measured
mum section width.
permissible inflation pressure. Refer For example: TREAD wear 200
TRACTION AA
TEMPERATURE A
the tire. Do not exceed the maximum
under controlled conditions on spec-
ified government test surfaces of
asphalt and concrete. A tire marked
C may have poor traction perform-
ance.
to the Tire and Loading Information
label for recommended inflation
pressure.
Tread wear
G201006AUN
The tread wear grade is a compara-
tive rating based on the wear rate of
the tire when tested under controlled
conditions on a specified govern-
ment test course. For example, a tire
graded 150 would wear one-and-a-
half times (1½) as well on the gov-
ernment course as a tire graded 100.
The relative performance of tires
depends upon the actual conditions
of their use, however, and may
depart significantly from the norm
due to variations in driving habits,
service practices and differences in
road characteristics and climate.
This number indicates the maximum
load in kilograms and pounds that
can be carried by the tire. When
replacing the tires on the vehicle,
always use a tire that has the same
load rating as the factory installed
tire.
These grades are molded on the
side-walls of passenger vehicle tires.
The tires available as standard or
optional equipment on your vehicle
may vary with respect to grade.
7
39
| Categories | Hyundai Manuals, Hyundai Genesis, Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Genesis |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)