EL ENG 4A.QXP 10/8/2010 2:57 PM Page 21
Features of your vehicle
OLM049022
OLM049023
OUN026013
Automatic reversal
Auto down window (if equipped)
(Driver’s window)
Auto up/down window (if equipped)
(Driver's window)
If the upward movement of the window is
blocked by an object or part of the body,
the window will detect the resistance and
will stop upward movement. The window
will then lower approximately 30 cm (11.8
in.) to allow the object to be cleared.
Pressing
the power
window
switch
Pressing or pulling up the power window
switch momentarily to the second detent
position (6) completely lowers or lifts the
momentarily to the second detent posi-
tion (6) completely lowers the driver’s
window
even
when
the
switch
is
window even when the switch is
released. To stop the window at the
desired position while the window is in
operation, pull up the switch momentarily
to the opposite direction of the window
movement.
released. To stop the window at the
desired position while the window is in
operation, pull up or press down and
release the switch.
If the power window does not operate
normally, the automatic power window
system must be reset as follows:
If the window detects the resistance
while the power window switch is pulled
up continuously, the window will stop
upward movement then lower approxi-
mately 2.5 cm (1 in.). And if the power
window switch is pulled up continuously
again within 5 seconds after the window
is lowered by the automatic window
reversal feature, the automatic window
reversal will not operate.
1.
Turn the ignition switch to the ON posi-
tion.
2.
Close the driver’s window and contin-
ue pulling up the driver’s power win-
dow switch for at least 1 second after
the window is completely closed.
4
21
| Categories | Hyundai Manuals, Hyundai ix35 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, ix35 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)