EL ENG 4A.QXP 10/8/2010 3:03 PM Page 79
Features of your vehicle
Windshield wipers
To vary the speed setting, turn the speed
control knob (1).
Operates as follows when the ignition
switch is turned ON.
If the wiper switch is set in AUTO mode
when the ignition switch is ON, the wiper
will operate once to perform a self-check
of the system. Set the wiper to OFF posi-
tion when the wiper is not in use.
:
For a single wiping cycle, move
the lever to this position and
release it. The wipers will operate
continuously if the lever is held in
this position.
O : Wiper is not in operation
CAUTION
---
: Wiper operates intermittently at the
same wiping intervals. Use this mode
in light rain or mist.To vary the speed
setting, turn the speed control knob.
When the ignition switch is ON and
the windshield wiper switch is
placed in the AUTO mode, use cau-
tion in the following situations to
avoid any injury to the hands or
other parts of the body:
Rain sensor
OEL049900
Auto control (if equipped)
1
2
: Normal wiper speed
: Fast wiper speed
The rain sensor located on the upper end
of the windshield glass senses the
amount of rainfall and controls the wiping
cycle for the proper interval. The more it
rains, the faster the wiper operates.When
the rain stops, the wiper stops.
•
Do not touch the upper end of the
windshield glass facing the rain
sensor.
✽
NOTICE
If there is heavy accumulation of snow
or ice on the windshield, defrost the
windshield for about 10 minutes, or
until the snow and/or ice is removed
before using the windshield wipers to
ensure proper operation.
•
Do not wipe the upper end of the
windshield glass with a damp or
wet cloth.
• Do not put pressure on the wind-
shield glass.
4
79
| Categories | Hyundai Manuals, Hyundai ix35 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, ix35 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)