EL ENG 7.QXP 10/8/2010 2:16 PM Page 67
Maintenance
Position light
Front fog light bulbs (if equipped)
1. Remove the front bumper under cover.
1.
2.
Turn off the engine and open the hood.
Remove the headlight bulb cover by
turning it counterclockwise.
2. Reach your hand into the back of the
front bumper.
3.
4.
Remove the socket from the assembly
by pulling it out.
3. Disconnect the power connector from
the socket.
Remove the bulb by pulling it straight
out.
Insert a new bulb into the socket.
4. Remove the bulb-socket from the
housing by turning the socket counter
clockwise until the tabs on the socket
align with the slots on the housing.
5.
6.
Install the socket into the assembly by
pushing it in.
5. Install the new bulb-socket into the
housing by aligning the tabs on the
socket with the slots in the housing.
Push the socket into the housing and
turn the socket clockwise.
OLM079031
Side repeater light bulb replace-
ment (if equipped)
6.
Connect the power connector to the
socket.
Reinstall the front bumper under cover.
Type A
If the light bulb does not operate, have
the vehicle checked by an authorized
HYUNDAI dealer.
7.
7
67
Product Specification
Categories | Hyundai Manuals, Hyundai ix35 Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, ix35 |
Document File Type | |
Copyright | Attribution Non-commercial |