EL ENG 4A.QXP 10/8/2010 3:00 PM Page 62
Features of your vehicle
4WD system warning light
(if equipped)
Engine coolant tempera-
ture warning light
(if equipped)
Electronic power steering
(EPS) system warning light
(if equipped)
EPS
When the ignition switch is turned to the
ON position, the 4WD indicator will illumi-
nate and then go off in a few seconds.
The warning light illuminates if the tem-
perature of the engine coolant is above
120±3°C (248±5.4°F).
This indicator light comes on after the
ignition key is turned to the ON position
and then it will go out.
If
the 4WD system warning light
Do not continue driving with an overheat-
ed engine. If your vehicle overheats, refer
to “Overheating” in section 6.
This light also comes on when the EPS
has some troubles. If it comes on while
driving, have your vehicle inspected by
an authorized HYUNDAI dealer.
illuminates, this indicates that there is a
malfunction in the 4WD system. If this
occurs, have your vehicle checked by an
authorized HYUNDAI dealer as soon as
possible.
✽
NOTICE
If the engine coolant temperature warn-
ing light illuminates, it indicates over-
heating that may damage the engine.
4WD LOCK indicator
(if equipped)
The 4WD LOCK indicator light is illumi-
nated when the 4WD LOCK button is
pushed. The purpose of this 4WD LOCK
mode is to increase the drive power
when driving on wet pavement, snow-
covered roads and/or off-road. The 4WD
LOCK indicator light is turned off by
pushing the button again.
CAUTION
Do not use 4WD LOCK mode on dry
paved roads or highway, it can
cause noise, vibration or damage of
4WD related parts.
4
62
| Categories | Hyundai Manuals, Hyundai ix35 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, ix35 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)