EL ENG 7.QXP 10/8/2010 2:16 PM Page 66
Maintenance
Turn signal light/Position light
Turn signal light
(Continued)
•
If a bulb becomes damaged or
cracked, replace it immediately
and carefully dispose of it.
1.
2.
Turn off the engine and open the hood.
Remove the socket from the assembly
by turning the socket counterclockwise
until the tabs on the socket align with
the slots on the assembly.
•
Wear eye protection when chang-
ing a bulb. Allow the bulb to cool
down before handling it.
3.
4.
Remove the bulb from the socket by
pressing it in and rotating it counter-
clockwise until the tabs on the bulb
align with the slots in the socket. Pull
the bulb out of the socket
OHD076046
Insert a new bulb by inserting it into
the socket and rotating it until it locks
into place.
WARNING - Halogen bulbs
•
•
Halogen bulbs contain pressur-
ized gas that will produce flying
pieces of glass if broken.
5. Install the socket in the assembly by
aligning the tabs on the socket with the
slots in the assembly. Push the socket
into the assembly and turn the socket
clockwise.
Always handle them carefully,
and avoid scratches and abra-
sions. If the bulbs are lit, avoid
contact with liquids. Never touch
the
glass
with
bare
hands.
Residual oil may cause the bulb
to overheat and burst when lit. A
bulb should be operated only
when installed in a headlight.
(Continued)
7
66
| Categories | Hyundai Manuals, Hyundai ix35 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, ix35 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)