Driving systems
211
Optical and acoustic collision warning
or obstacles. An inappropriate brake
When you switch on the appropriate turn
signals to change lanes and a vehicle is
detected in the side monitoring range of
Active Blind Spot Assist, you receive an
optical and acoustic collision warning. You
then hear a double warning tone and red
warning lamp: flashes. If the turn signal
remains on, detected vehicles are indicated
by the flashing of red warning lamp:. There
are no further warning tones.
application may be interrupted at any time if
you steer slightly in the opposite direction or
accelerate.
You are responsible for the vehicle's speed,
braking in good time, and steering correctly.
Always adapt your driving style to suit the
prevailing road and weather conditions.
Always pay attention to traffic conditions and
your surroundings. Otherwise, you may fail to
recognize dangers in time, cause an accident
and injure yourself and others.
Course-correcting brake application
If Active Blind Spot Assist detects a risk of
collision in the monitoring range, under
certain circumstances, it will brake the
vehicle briefly on one side. This is designed to
help you avoid a collision.
Either a very slight, course-correcting brake
application, or none at all, may occur if:
Rother vehicles and/or objects, such as
crash barriers, are detected in the
immediate vicinity of your vehicle.
Ra vehicle approaches you too closely at the
side.
Ryou have adopted a sporty driving style with
high cornering speeds.
Ryou clearly brake or accelerate.
This function is available at speeds between
20
mph and 120 mph (30 km/h and
200
km/h).
When a course-correcting brake application
occurs, red warning lamp: flashes in the
exterior mirror and the following is shown in
the multifunction display, for example:
Ra driving safety system intervenes, such as
ESP® or PRE-SAFE® Brake.
RESP® is deactivated.
Ra loss of tire pressure or a defective tire has
been detected and shown in the display.
Activating Active Blind Spot Assist
X Make sure that the radar sensor system
(
(
computer.
X Turn the SmartKey to position 2 in the
ignition lock.
Warning lamps: light up in red in the
exterior mirrors for approximately 1.5
seconds and then turn yellow.
Y page 232) and Active Blind Spot Assist
G Warning
Y page 228) are activated in the on-board
Active Blind Spot Assist is only an aid
designed to assist driving. It is not a substitute
for attentive driving. In some cases, the
course-correcting brake application is not
sufficient to avoid a collision. In such a case,
you must steer, brake or accelerate.
In very rare cases, the system may
erroneously detect a danger of collision in the
area of crash barriers or similar lane borders
and apply the brakes. Active Blind Spot Assist
does not detect all traffic situations and road
users. Always make sure that there is
Active Lane Keeping Assist
Important safety notes
Active Lane Keeping Assist monitors the area
in front of your vehicle by means of a camera
at the top of the windshield. Active Lane
sufficient distance to the side for other traffic
Z
| Categories | Mercedes-Benz E-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes Benz C207, Mercedes Benz E350 BlueTEC, Mercedes-Benz E350, Mercedes-Benz E550, Mercedes-Benz E63 AMG, Mercedes-Benz W212 |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 3 out of 3)
Automotive readers have rated 2011 Mercedes-Benz E350 E350 BlueTEC E550 E63 AMG W212 C207 Sedan Owners Manual 3.0 out of 3.0 based on 1 product reviews. Good performance.
Safety.
Comfort