Tire pressures
359
X Press the9 or: button to select
Tire Pressure.
minutes of driving, and the tire pressures
are displayed for the correct positions.
X Press thea button.
The current tire pressure for each wheel will
be displayed in the multifunction display.
Restarting the tire pressure monitor
G Warning
If the vehicle has been parked for longer than
It is the driver's responsibility to set the tire
inflation pressure to the recommended cold
tire inflation pressure. Underinflated tires
affect the ability to steer or brake the vehicle.
You might lose control over the vehicle.
20
minutes, theTire pressures will be
displayed after driving a few
minutes message appears in the display.
After a teach-in period, the tire pressure
monitor automatically recognizes new wheels
or new sensors. As long as a clear allocation When you restart the tire pressure monitor,
of the tire pressure values to the individual
wheels is not possible, theTire Pressure
all existing warning messages are deleted and
the warning lamps go out. The monitor uses
Monitor Active message is shown instead the currently set tire pressures as the
reference values for monitoring.
of the tire pressure display. The tire pressures
are already being monitored.
The TPMS must be restarted when you set the
tire pressure to a new value (as a result of
changed handling or load characteristics, for
example). The TPMS then monitors the new
tire pressure values.
i If a spare wheel/emergency spare wheel
is mounted, the system may continue to
show the tire pressure of the wheel that has
been removed for a few minutes. If this
occurs, note that the value displayed for
the position where the spare wheel is
mounted is not the same as the spare
wheel/emergency spare wheel's current
tire pressure.
i Canada only: in most cases, the tire
pressure monitor recognizes the new
reference values automatically. However,
you can also define reference values
manually as described here.
Restart the tire pressure monitor after you
have set the tire pressure to the value
recommended for the desired driving
TPMS warning messages
If the tire pressure monitor detects a
significant pressure loss on one or more tires,
a warning message is shown in the
multifunction display. A warning tone also
sounds and the tire pressure warning lamp
lights up in the instrument cluster.
Each tire that is affected by a significant loss
of pressure is highlighted by a red rectangle.
If theCorrect Tire Pressure message
situation (Y page 352). Only correct tire
pressures on cold tires. Comply with the
recommended tire pressures on the Tire and
Loading Information placard on the B-pillar on
the driver's side Additional tire pressure
values for driving at high speeds or with heavy
loads can be found in the Tire Pressure table
on the inside of the fuel filler flap.
X Make sure that the tire pressure is correct
on all four wheels.
appears in the multifunction display:
X Check the tire pressure on all four wheels
and correct it if necessary.
X Make sure that the SmartKey is in position
2
in the ignition lock.
i If the wheel positions on the vehicle are
interchanged, the tire pressures may be
displayed for the wrong positions for a
short time. This is rectified after a few
X Press the= or; button to select the
Serv. menu.
X Press the9 or: button to select
Tire Pressure.
Z
| Categories | Mercedes-Benz E-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes Benz C207, Mercedes Benz E350 BlueTEC, Mercedes-Benz E350, Mercedes-Benz E550, Mercedes-Benz E63 AMG, Mercedes-Benz W212 |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 3 out of 3)
Automotive readers have rated 2011 Mercedes-Benz E350 E350 BlueTEC E550 E63 AMG W212 C207 Sedan Owners Manual 3.0 out of 3.0 based on 1 product reviews. Good performance.
Safety.
Comfort