Occupant safety
57
X Slide the belt sash guide downwards.
X Release belt sash guide release: and
make sure that the belt sash guide has
engaged.
after approximately six seconds or once the
driver's seat belt is fastened.
If, after six seconds, the driver or front-
passenger have not fastened their seat belts
and the doors are closed:
Using the seat belt on the center rear
seat
Rthe7 seat belt warning lamp remains
illuminated as long as either the driver's or
front-passenger seat belt is not fastened.
Rif the vehicle speed exceeds 15 mph
If the left-hand rear seat backrest is folded
down and back up again, the rear center seat
belt may lock. The seat belt can then not be
pulled out.
(25
km/h), the7 seat belt warning
lamp lights up. Additionally, a warning tone
will sound with increasing intensity for a
maximum of 60 seconds or until the
driver's and front-passenger seat belt are
fastened.
X To unlock the rear center seat belt: pull
the seat belt out approximately 1 in
(25
mm) from the belt outlet on the seat
backrest and release again.
The seat belt is retracted and released.
If the driver/front passenger unfasten their
seat belt while the vehicle is in motion, the
7
warning tone sounds again.
seat belt warning lamp lights up and a
Releasing seat belts
X Press release button? (Y page 55) and
guide belt tongue; back towards belt
sash guide:.
The warning tone ceases even if the driver or
front passenger have still not fastened their
seat belt after 60 seconds. The7 seat belt
warning lamp stops flashing but remains
illuminated.
!
Make sure that the seat belt is fully rolled
up. Otherwise, the seat belt or belt tongue
will be trapped in the door or in the seat
mechanism. This could damage the door,
the door trim panel and the seat belt.
Damaged seat belts can no longer fulfill
their protective function and must be
replaced. Consult an authorized Mercedes-
Benz Center.
After the vehicle comes to a standstill, the
warning tone is reactivated and the7 seat
belt warning lamp flashes again if the vehicle
speed again exceeds 15 mph (25 km/h) .
The7 seat belt warning lamp only goes
out if:
Rboth the driver and the front passenger
have fastened their seat belts.
Belt warning for driver and front
passenger
or
Rthe vehicle is stationary and a door is open.
Regardless of whether the driver's and front-
passenger seat belts have already been
fastened, the7 seat belt warning lamp
lights up for six seconds each time the engine
is started. It then goes out once the driver and
the front passenger have fastened their seat
belts.
If the driver's seat belt is not fastened after
the engine is started, an additional warning
tone will sound. The warning tone goes out
i For more information on the7 seat
belt warning lamp, see "Indicator and
warning lamps in the instrument cluster,
seat belt" (Y page 264).
Emergency Tensioning Devices and
seat belt force limiters
The front seat belts and the outer seat belts
in the rear are equipped with ETDs and belt
force limiters.
Z
Categories | Mercedes-Benz E-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes Benz C207, Mercedes Benz E350 BlueTEC, Mercedes-Benz E350, Mercedes-Benz E550, Mercedes-Benz E63 AMG, Mercedes-Benz W212 |
Model Year | 2011 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
(1 votes, average: 3 out of 3) Automotive readers have rated 2011 Mercedes-Benz E350 E350 BlueTEC E550 E63 AMG W212 C207 Sedan Owners Manual 3.0 out of 3.0 based on 1 product reviews.
Good performance.
Safety.
Comfort