Engine compartment
312
Windshield washer system/headlamp
cleaning system
X Mix the windshield washer fluid in a
container beforehand.
X At temperatures above freezing: fill the
washer fluid reservoir with a mix of water
and windshield washer concentrate (e.g.
MB SummerFit).
X At temperatures below freezing: fill the
washer fluid reservoir with a mix of water
and MB SummerFit windshield washer
concentrate. For information on the mixing
ratio, see (Y page 393) or use the premixed
windshield washer solution with antifreeze
available in specialist stores.
The washer fluid reservoir is used for both the
windshield washer system and the headlamp
cleaning system.
G Warning
Washer solvent/antifreeze is highly
flammable. Do not spill washer solvent/
antifreeze on hot engine parts, because it may
ignite and burn. You could be seriously
burned.
!
At temperatures below freezing, always
X To open: pull cap: upwards by the tab.
fill the washer fluid container with a mix of
windshield washer concentrate and
antifreeze additive. There is otherwise a
risk of damaging the windshield washer
system/headlamp cleaning system.
X Add the premixed washer fluid.
X To close: press cap: onto the filler neck
until it engages.
!
Only use washer fluid concentrate which Brake fluid level
is suitable for plastic lenses. Unsuitable
washer fluid concentrate could damage the
plastic lenses of the headlamps.
!
If you discover that the brake fluid level in
the brake fluid reservoir has fallen to the
MIN mark or below, check the brake
system for leaks immediately. Also check
the brake lining thickness. Contact a
qualified specialist workshop, e.g. an
authorized Mercedes-Benz Center
immediately.
!
Do not add distilled or de-ionized water to
the washer fluid container. Otherwise, the
fluid level measuring gauge could be
damaged.
i Add windshield washer concentrate, e.g.
MB SummerFit, to the washer fluid all year
round.
Do not top up the brake fluid. This will not
rectify the malfunction.
Only check the brake fluid level when the
vehicle is stationary and on a level surface.
Example: washer fluid reservoir
The brake fluid level is correct if it is between
MIN marking; and MAX marking: on the
brake fluid reservoir.
Product Specification
Categories | Mercedes-Benz E-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes Benz C207, Mercedes Benz E350 BlueTEC, Mercedes-Benz E350, Mercedes-Benz E550, Mercedes-Benz E63 AMG, Mercedes-Benz W212 |
Model Year | 2011 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Good performance.
Safety.
Comfort