Driving systems
185
i If depressing the brake pedal the first
time does not activate the HOLD function,
wait briefly and then try again.
If you leave the vehicle or park it, deactivate
the HOLD function and secure the vehicle
against rolling away.
G Warning
You will see a warning message in the
multifunction display if the HOLD function is
activated and:
The vehicle's brakes are applied when the
HOLD function is activated. For this reason,
deactivate the HOLD function if the vehicle is
to be set in motion by other means (e.g. in a
car wash or by towing).
Rthe driver's door is open and the driver's
seat belt is unfastened.
Rthe engine is switched off.
Rthe hood is opened.
Deactivating the HOLD function
Shift to 'P'
X Move the selector lever to P to prevent the
vehicle from rolling away.
The HOLD function is deactivated. The
warning message in the multifunction
display disappears.
The HOLD function is deactivated
automatically if:
Ryou accelerate and the transmission is in
position D or R.
Rthe transmission is in position P.
Ryou apply the brakes again with a certain
amount of pressure untilHOLD disappears
from the multifunction display.
Ryou activate DISTRONIC PLUS.
A horn will also sound at regular intervals if
the HOLD function is activated and you:
Rswitch the engine off, open the driver's
door and take off your seat belt
Ropen the hood
G Warning
Never get out of the vehicle when the HOLD
function is activated.
The sounding of the horn alerts you to the fact
that the vehicle has been parked while the
HOLD function is still activated. The tone
becomes louder if you attempt to lock the
vehicle. The vehicle is not locked until the
HOLD function is deactivated.
The HOLD function must never be operated
or deactivated by a passenger or from outside
the vehicle.
The HOLD function does not replace the
parking brake and must not be used for
parking.
i If the engine has been switched off, it
cannot be started again until the HOLD
function has been deactivated.
The braking effect of the HOLD function is
canceled and the vehicle could roll away if:
If there is a malfunction in the system or
power supply while the HOLD function is
activated, theBrake Immediately message
is shown in the multifunction display.
Immediately depress the brake firmly until
the warning message in the multifunction
display goes out.
Rthe HOLD function is deactivated by
depressing the accelerator pedal or the
brake pedal.
Rthere is a malfunction in the system or an
interruption in the power supply, e.g.
battery failure.
You can also shift the transmission to position
P. This deactivates the HOLD function.
Rthe electrical system in the engine
compartment, the battery or the fuses are
tampered with.
Rthe battery is disconnected.
Z
| Categories | Mercedes-Benz E-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes Benz C207, Mercedes Benz E350 BlueTEC, Mercedes-Benz E350, Mercedes-Benz E550, Mercedes-Benz W212 |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 4 out of 5)
Automotive readers have rated 2011 Mercedes-Benz E350 E350 BlueTEC E550 W212 C207 Coupe Owners Manual 4.0 out of 5.0 based on 2 product reviews. excellent car.
few limited issues
Very good. Very good. Very good.