Anti-theft systems
70
G Warning
PRE-SAFE® Brake does not always detect
complex traffic situations properly. You can
terminate the braking action of PRE-SAFE®
Brake in a non-critical driving situation at any
time if:
Depending on the vehicle speed, PRE-SAFE®
Brake brakes your vehicle with a maximum of
13
ft/s2 (4 m/s2) before a possible hard stop.
This corresponds to about 40 % of the
maximum deceleration ability of your vehicle.
The driver must apply the brakes additionally
in order to prevent a collision. The self-acting
hard stop will be initiated when the imminent
danger of a collision exists, e.g. when an
evasive maneuver cannot avoid an accident.
Ran acoustic and visual warning occurs
Rthe vehicle brakes
To end this, you can either depress the
accelerator pedal further, activate kickdown
or release the brake pedal.
The braking action of PRE-SAFE® Brake is
ended automatically if:
In order to maintain the appropriate distance
to the vehicle in front and thus prevent a
collision, you must apply the brakes yourself.
Ryou maneuver to avoid the obstacle
Ryou drive slower than approximately
At speeds up to approximately
9
mph (15 km/h)
40
mph (70 km/h), PRE-SAFE® Brake can
Rthere is no longer an obstacle detected in
front of your vehicle
Rthere is no longer any danger of a collision
Following a collision or accident-related
damage to the front end of the vehicle, have
the configuration and operation of the radar
sensors checked. Choose a qualified
specialist workshop for this which has the
necessary specialist knowledge and tools for
the work required. Mercedes-Benz
also detect stationary obstacles, for example
stopped or parked vehicles.
G Warning!
If you do not receive visual or acoustic
warning signals, the PRE-SAFE® Brake may
Rnot have recognized the collision risk
Rhave been deactivated
Rbe malfunctioning
Apply the brakes yourself to avoid a collision.
recommends that you use an authorized
Mercedes-Benz Center for this purpose.
X To activate: activate PRE-SAFE® Brake in
the on-board computer (Y page 207).
TheÄ symbol appears in the lower
multifunction display, as long as the HOLD
function is not activated (Y page 184).
Anti-theft systems
Immobilizer
On vehicles with parking guidance, the P
gear must be engaged for the icon to be
displayed.
The immobilizer prevents your vehicle from
being started without the correct key.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. The
engine can be started by anyone with a valid
key that is left inside the vehicle.
For PRE-SAFE® Brake to assist you when
driving, the radar sensor system must be
switched on and operational.
X To activate with the SmartKey: remove
the SmartKey from the ignition lock.
X To activate with KEYLESS-GO: switch the
ignition off and open the driver's door.
X To deactivate: switch on the ignition.
| Categories | Mercedes-Benz E-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes Benz C207, Mercedes Benz E350 BlueTEC, Mercedes-Benz E350, Mercedes-Benz E550, Mercedes-Benz W212 |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 4 out of 5)
Automotive readers have rated 2011 Mercedes-Benz E350 E350 BlueTEC E550 W212 C207 Coupe Owners Manual 4.0 out of 5.0 based on 2 product reviews. excellent car.
few limited issues
Very good. Very good. Very good.