Tire pressures
312
i This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful
interference, and
then remain illuminated. This sequence will
continue upon subsequent vehicle start-ups
as long as the malfunction exists. When the
malfunction indicator is lit, the system may
not be able to detect or signal low tire
pressure as intended.
2.
This device must withstand any
TPMS malfunctions may occur for a variety of
reasons, including the installation of
interference received, including
interference that may cause undesired
operation.
Any unauthorized modification to this
device could void the user's authority to
operate the equipment.
incompatible replacement or alternate tires
or wheels on the vehicle that prevent the
TPMS from functioning properly. Always
check the TPMS malfunction indicator after
replacing one or more tires or wheels on your
vehicle to ensure that the replacement or
alternate tires and wheels allow the TPMS to
continue to function properly.
Checking the tire pressure
electronically
X Make sure that the key is in position
2(Y page 151) in the ignition lock.
X Using= or;, select theServ.
menu.
X Using9 or:, selectTire
Pressure.
X Press thea button.
The current tire pressure of each tire is
shown in the multifunction display.
i If the tire pressure monitoring system
malfunctions, it may take up to 10 minutes
before the malfunction is displayed to you
by the tire pressure warning lamp flashing
for 60 seconds and then remaining lit.
When the error has been rectified, the tire
pressure warning lamp goes out after a few
minutes of driving.
Information on tire pressures is displayed in
the multifunction display. After a few minutes
of driving, the current tire pressure of each
tire is shown in the multifunction display.
If the vehicle has been parked for longer than
20
minutes and subsequently you have not
driven faster than 15 mph (25 km/h), the
Tire pressures will be displayed
i The tire pressure values in the on-board after driving for a few minutes
computer may deviate from the inflation
pressure as measured using a tire pressure
checker at the filling station. The tire
pressures shown in the on-board computer
refer to pressures at sea level. At high
altitudes, a tire pressure checker will
display a higher tire pressure than the on-
board computer. In this case do not reduce
the tire pressure.
message is shown.
After a teach-in process, the tire pressure
monitor automatically detects new wheels or
new sensors. As long as it is not possible to
allocate tire pressure values to individual
wheel positions, theTire Pressure
Monitor Active message appears instead
of the tire pressure display. The tire pressures
are already being monitored.
i If radio transmitting equipment (e.g. radio
headphones, a two-way radio) is operated
in or near the vehicle, this can lead to the
function of the tire pressure monitor being
impaired.
i If a spare wheel is installed, the system
may continue to show the tire pressure of
the wheel that has been removed for a few
minutes. If this occurs, note that the value
displayed for the position where the
emergency spare wheel/spare wheel is
| Categories | Mercedes-Benz E-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes Benz C207, Mercedes Benz E350 BlueTEC, Mercedes-Benz E350, Mercedes-Benz E550, Mercedes-Benz W212 |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 4 out of 5)
Automotive readers have rated 2011 Mercedes-Benz E350 E350 BlueTEC E550 W212 C207 Coupe Owners Manual 4.0 out of 5.0 based on 2 product reviews. excellent car.
few limited issues
Very good. Very good. Very good.