2014 Hyundai Elantra Coupe Owners Manual

Features of your vehicle
Gate operator &  Canadian program-     Reprogramming a single HomeLink®     Erasing HomeLink® buttons
ming
button
Individual buttons cannot be  erased.
During programming,  your handheld     To program  a new device to a  previ-     However,  to   erase   all  three   pro-
transmitter  may   automatically  stop     ously trained  HomeLink® button, fol-     grammed buttons:
transmitting.  Continue  to  press  the     low these steps:
1.
Press   and  hold   the   two  outer
HomeLink® buttons  until  the indi-
Integrated
HomeLink ®
Wireless
1.
Press
HomeLink ®
and
hold
the
desired
Control System button (note
button.
Do    NOT
cator light begins  to flash-after 20
seconds.
steps  2  through  4 in  the  Standard
Programming  portion  of  this  docu-
ment) while  you press  and re-press
release until step 4 has been com-
pleted.
2.
Release both buttons. Do not hold
for longer than 30 seconds.
2.
When the indicator  light begins to
flash  slowly   (after  20  seconds),
position the handheld transmitter 1
3   inches    away    from    the
HomeLink® surface.
("cycle")
your  handheld  transmitter
The Integrated  HomeLink® Wireless
every two seconds until  the frequen-
cy signal has been learned. The indi-
cator light  will flash  slowly and then
rapidly  after  several  seconds  upon
successful training.
Control System is now in the training
(learn)    mode   and   can   be    pro-
grammed  at any  time  following  the
to
3.
Press   and   hold   the   handheld
transmitter button.The HomeLink®     Programming chapters above.
appropriate
steps
in
the
indicator light will flash, first slowly
and then rapidly.
Operating HomeLink®
To operate, simply press and release     4. When the indicator light  begins to
the programmed  HomeLink® button.
flash rapidly, release both buttons.
Activation   will  now   occur   for  the
trained   device   (i.e.   garage   door
opener, gate  operator,  security sys-
tem,  entry   door   lock,  home/office
lighting,  etc.). For  convenience,  the
hand-held  transmitter  of the  device
may also be used at any time.
5.
Press  and   hold  the   just-trained
HomeLink®  button   and  observe
the red Status Indicator LED. If the
indicator light  stays on constantly,
programming    is   complete   and
your new device should activate.
4
47
Product Specification
Categories Hyundai Manuals, Hyundai Elantra Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 550 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, Elantra
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field