2014 Hyundai Elantra Coupe Owners Manual

Specifications, Consumer information, Reporting safety defects
Recommended SAE viscosity
number
Engine  oil viscosity  (thickness)  has     Using oils of any viscosity other than
an effect  on fuel  economy and  cold     those recommended  could  result in
weather operating  (engine start  and     engine damage.
engine oil flowability). Lower  viscosi-
CAUTION
When choosing  an oil,  consider the
ty engine oils can  provide better fuel
economy and cold  weather perform-
ance,    however,   higher    viscosity
engine oils  are required for satisfac-
tory lubrication in hot weather.
range  of  temperature   your  vehicle
will be operated in before the next oil
change. Proceed  to  select  the  rec-
ommended   oil  viscosity   from   the
chart.
Always be sure to clean the area
around   any  filler   plug,   drain
plug,  or dipstick  before  check-
ing  or   draining  any  lubricant.
This  is  especially important  in
dusty or sandy  areas and when
the vehicle  is used on  unpaved
roads.  Cleaning   the  plug  and
dipstick  areas  will prevent  dirt
and    grit   from    entering    the
engine  and  other  mechanisms
that could be damaged.
Temperature Range for SAE Viscosity Numbers
Temperature    °C
(°F)
-30
-20
-10
-10
20
0
10
20
30
40
100
50
120
0
40
60
80
10W-30
Engine Oil *
1
5W-20, 5W-30
*
1
. For better fuel economy, it is recommended to use the engine oil of
a viscosity grade SAE 5W-20  (API SM / ILSAC GF-4). However, if
the engine  oil  is not  available in  your country,  select the  proper
engine oil using the engine oil viscosity  chart.
8
5
Product Specification
Categories Hyundai Manuals, Hyundai Elantra Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 550 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, Elantra
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field