What to do in an emergency
Distributing the sealant
Immediately drive approximately
(7~10km or about 10
minutes) to evenly distribute the
sealant in the tire.
Checking the tire inflation pres- ✽ NOTICE
sure
11.
The pressure gauge may show high-
er than actual reading when the
compressor is running. To get an
accurate tire pressure, the compres-
sor needs to be turned off.
1.After
driving
approximately
4~6miles
4~6miles
(7~10km or about
10
minutes), stop at a safety loca-
tion.
Do not exceed a speed of 50 mph
2.Connect
connection hose (9) of the
(80
km/h). If possible, do not fall
compressor directly to the tire
valve.
below a speed of 12 mph (20 km/h).
- To reduce the inflation pressure:
Loosen the screw cap (8) on the
compressor hose.
While driving, if you experience any
unusual vibration, ride disturbance or
noise, reduce your speed and drive
with caution until you can safely pull 4.Adjust the tire inflation pressure to
off of the side of the road.
3.Plug
the compressor power cord
into the vehicle power outlet.
the recommended tire inflation.
Call for road side service or towing.
With the ignition on, proceed as fol-
lows.
When you use the Tire Mobility Kit,
the tire pressure sensors and wheel
may be damaged by sealant, remove
the sealant stained with tire pressure
sensors and wheel and inspect at an
authorized dealer.
- To increase the inflation pressure:
Switch on the compressor, posi-
tion I. To check the current infla-
tion pressure setting, briefly
switch off the compressor.
6
25
| Categories | Hyundai Manuals, Hyundai Elantra Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Elantra |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)