What to do in an emergency
7.Connect
the other end of the sec- Disconnect the jumper cables in the
Jumper Cables
ond jumper cable to the chassis exact reverse order you connected
ground of your vehicle (4).
them:
Do not allow the jumper cables to 1.Disconnect the jumper cable from
contact anything except the correct
battery or jumper terminals or the
correct ground. Do not lean over
the battery when making connec-
tions.
the chassis ground of your vehicle
(4).
2.Disconnect the other end of the
jumper cable from the black, nega-
tive (-) battery of the assisting vehi-
cle (3).
3.Disconnect the second jumper
cable from the red, positive (+) bat-
tery/jumper terminal of the assist-
ing vehicle (2).
(-)
(+)
(-)
Jumper Terminal
(+)
8.Start
the engine of the assisting
vehicle and let it run at approxi-
mately 2,000 rpm for a few min-
utes. Then start your vehicle.
Booster Battery
OLMB063002/Q
4.Connect
the jumper cables in the
exact sequence shown in the illus-
tration. First connect one jumper
cable to the red, positive (+)
jumper terminal of your vehicle (1).
If your vehicle will not start after a 4.Disconnect the other end of the
few attempts, it probably requires
servicing. In this event please seek
qualified assistance. If the cause of
your battery discharging is not
apparent, have your vehicle checked
by an authorized HYUNDAI dealer.
jumper cable from the red, positive
(+) jumper terminal of your vehicle
(1).
5.Connect
the other end of the
jumper cable to the red, positive
battery/jumper terminal of the
assisting vehicle (2).
(+)
6.Connect
the second jumper cable
to the black, negative (-) battery of
the assisting vehicle (3).
6
7
| Categories | Hyundai Manuals, Hyundai Elantra Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Elantra |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)