Features of your vehicle
10. TUNE/ENTER Knob
11. PRESET Button
Push [1]~[6] buttons less than 0.8 sec to
play the channel saved in each button.
Push PRESET button for 0.8 sec or longer
to save current channel to the respective
button with a beep.
Adjust
Display
Return
>
>
Turn this knob clockwise by one notch to
increase frequency by 0.05Mhz from cur-
rent frequency.
Clock
24Hour
Scroll > On
Return
Turn this knob counterclockwise by one
notch
to decrease frequency by
100kHz(0.05Mhz) from current frequency.
❈
If Audio is ON
1. Press SETUP button.
2. Select CLOCK menu by rotating/pressing
TUNE knob.
3. Select
flash.
4. Adjust hour by rotating TUNE knob.
TO SETUP CLOCK
Press this knob whilst holding SETUP
button to activate / inactivate the item.
Select SETUP item using left and right
function of the Tune knob.
12. SCAN Button
If the SCAN button is pressed during
receiving the broadcast for 5 sec, if can-
cels SCAN operation and receives the
broadcast flickering at that time.
When inputting SCAN KEY during
receiving the broadcast for 5 sec cancel
the operation of SCAN and receive the
broadcast flickering at that time.
(0.05Mhz) is A-200PAS only.
ADJUST and current hour will
GENERAL FM 100kHz
AM
EUROPE FM
MW
9kHz
5. Press
TUNE knob and now current
minute will flash.
minute and push TUNE knob
when finished.
50kHz
In case of no input for cancel after
inputting SCAN KEY, operate SCAN only
1CYCLE.
6. Adjust
9kHz
LW
1kHz, 3kHz(AUTO)
7. Press SETUP button or select RETURN
to exit SETUP mode.
USA FM 200kHz
AM
10kHz
If Audio is OFF
1. Press SETUP button and current hour
will flash.
2. Adjust hour and press TUNE knob.
3. Rotate
TUNE knob to adjust minute
when the current minute is flashing.
4. Push
TUNE knob, and press SETUP
button or select RETURN to exit
SETUP mode.
4
82
Product Specification
Categories | Hyundai Manuals, Hyundai i10 Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, i10 |
Document File Type | |
Copyright | Attribution Non-commercial |